X-ray fluorescence analysis of zinc and zinc-iron alloy coated steel sheet
Since it is possible to apply zinc to the surface of steel sheet in large quantities, hot-dipped zinc coated steel sheet is used for applications...
Since it is possible to apply zinc to the surface of steel sheet in large quantities, hot-dipped zinc coated steel sheet is used for applications...
The general preparation method of fusion bead, equipment, reagents and other important considerations were described in the previous article “Sample preparation for X-ray fluorescence analysis...
Cement is used as a raw material in the construction of buildings, tunnels, dams, and bridges. Basically, cement consists of clinker, calcium sulfate hydrate as...
Cement is used for concrete in construction and architectural structures. Clinker, which is an intermediate material for cement, is produced by mixing and calcinating cement...
In the manufacturing process of semiconductor products, thin film inspection methods vary depending on the purpose. For example, optical such as ellipsometers, sheet resistance film...
A new sequential benchtop wavelength-dispersive X-ray fluorescence spectrometer, the Supermini200, has been released.
The Supermini200 successfully inherits all of the superior characteristics of the Supermini...
The fusion method in X-ray fluorescence (XRF) analysis is an effective sample preparation technique for getting accurate analysis results of powder samples, since the technique...
There are growing demands for mineral resources around the world, and rapid and accurate elemental analysis is required at a satellite laboratory in a mining...
In recent years, with new developments in industrialized countries, there are increasing demands for the analysis of rare metals and other mineral resources. Supermini, a...
Owing to the recent developments in emerging nations, the consumptions and, therefore, the productions of cement are increasing rapidly. Worldwide demands for benchtop X-ray fluorescence...