地质与矿物
物相、元素与化学分析
在研究行星演化过程与地球物质组成时,地质学家需要对岩石及矿物样本的成分与分子结构进行系统分析。X射线分析技术长期作为地质研究的核心手段,凭借微区激发、面扫描分析与无标样定量分析等先进功能,进一步拓展了其分析能力。
X 射线荧光(XRF)技术是表征地质材料元素组成的关键技术。新一代波长色散型X射线荧光(WDXRF)光谱仪采用微区分析技术与XY样品台,可自动完成多点测量,生成化学成分分布图。
高性能能量色散型X射线荧光(EDXRF)光谱仪,可以在不破坏、消解、前处理样品的情况下,实现从钠到铀元素的快速、无损分析。
X 射线衍射(XRD)技术用于物相组成的定量分析。X 射线衍射数据的Rietveld修正是目前公认的最强大的晶相定量分析方法。理学凭借其先进技术与专业经验,为上述分析需求提供多种独特解决方案。
应用说明
探索成功应用案例,甄选最佳分析技术
-
WDXRF1122 - Silicate Rock Analysis by Fusion Bead Method on ZSX Primus III NEXT
-
WDXRF1118 - Quality and Process Control Analysis of Natural and Processed Iron Ores by the Pressed Powder Method
-
WDXRF1111 - FeO Analysis in Iron Ore Sinters Using the XRD Channel on multi-channel XRF Spectrometer Simultix 15
-
WDXRF1100 - Fused Bead Analysis for Wide Concentration Ranges of Various Oxide Materials using OXIDE-FB-PAK
-
WDXRF1095 - Multiple Element Determination of Nickel Sulfide Ores by the Pressed Powder Method on Simultix 15
-
WDXRF1094 - Quality and Process Control of Natural and Processed Iron Ores by the Pressed Powder Method on Simultix 15
-
WDXRF1092 - Fixed Angle Measurement using the Semi-Quantitative Analysis Function SQX of ZSX Guidance Software
-
WDXRF1090 - Semi-quantitative Analysis of Recycled Solid Fuel with Benchtop WDXRF Supermini200
-
WDXRF1089 - Analysis of Hazardous Heavy Elements in Soil and Sediment using ZSX Primus IV
-
WDXRF1084 - Mapping and Small Spot Analysis with a General-Purpose XRF Spectrometer
-
WDXRF1071 - Semi-quantitative FP Analysis of Geological Samples
-
WDXRF1068 - Silicate Rock Analysis by Fusion Method
-
WDXRF1067 - Fast and Accurate Determination of the Composition of Natural and Processed Iron Ores by the Fusion Method on Simultix 15
-
WDXRF1066 - Determination of Chemical Composition of Nickel Laterite Ore by Fusion Method
-
WDXRF1061 - Polymetallic Sulfide Ore Analysis with Supermini200
-
WDXRF1059 - Semi-quantitative Analysis of Glass Raw Materials
-
WDXRF1058 - Quantitative Analysis of Dolomite and Limestone by Pressed powder Method with Supermini200
-
WDXRF1052 - Accurate Determination for Elements in Laterite Ores by Pressed Powder Method
-
WDXRF1048 - Fused Bead Analysis for Wide Concentration Ranges of Various Oxide Materials on Benchtop WDXRF
-
WDXRF1047 - Highly Accurate Determination of Total Iron in Natural and Processed Iron Ores using Pressed Powder Method
-
WDXRF1041 - Copper Concentrate by Pressed Powder Method
-
WDXRF1036 - Semiquant Analysis by the SQX Scatter FP Method
-
WDXRF1027 - Cu Concentrate with Advanced Correction for Fused Beads
-
WDXRF1019 - Silicate Rock Analysis by Fusion Method
-
WDXRF1002 - Analysis of Iron Ores by Oressed Powder Method
-
TA5011 - The Glass Transition and Softening for Glass Material
-
TA5006 - The Difference of Aging for Materials by Thermal Analysis
-
RACCT9020 - Three sandstone porosity comparison by X-ray CT
-
RACCT9019 - Sandstone pore network analysis by X-ray CT
-
RACCT9018 - Sandstone Grain Size Analysis by X-ray CT
-
RACCT9017 - Sand Oil and Brine Segmentation by X-ray CT
-
RACCT9016 - Rock Crack Analysis by X-ray CT
-
RACCT9015 - Granite Phase Fraction Analysis by X-ray CT
-
RACCT9014 - Carbonate porosity analysis by X-ray CT - Segmentation comparison
-
RACCT9013 - Ammonite Fossil Scan by X-ray CT
-
EDXRF3134 - NEX CG II - Analysis of Rare Earth Elements in Clay
-
EDXRF1769 - NEX QC+ QuantEZ—Mud Logging
-
EDXRF1587 - NEX QC+—MgO & P₂O₅ in Phosphate Rock
-
EDXRF1187 - NEX QC—Ti & Fe in Kaolin Clay
-
EDXRF1177 - NEX QC—Iron Oxide in Silica Sand
-
B-XRD1172 - Phase Identification and Quantitative Analysis of Rare Earth Ore by X-ray Diffraction
-
B-XRD1127 - Background Reduction for Iron Oxide with CuKα X-rays using XRF Mode
-
B-XRD1125 - Quantification of the Taste of Salt by DD (Direct Derivation) Method
-
B-XRD1111 - Quantitative Analysis of 3-component Sample by DD method
-
B-XRD1103 - Phase Identification of a Coarse-grained Trace Component in a Mineral Powder using 2D XRD
-
B-XRD1101 - High-T analysis - MiniFlex with HyPix-400 MF / BTS 500
-
B-XRD1002 - Quantification of a 4-component Sample using RIR method
-
B-XRD1001 - Quantitative Analysis of a 4-component Sample
-
B-TA1091 - Analysis of Soils by STA Differences Depending on Sampling Location
-
B-TA1080 - Semi-Quantitative Evaluation of Serpentine Content in Serpentinite by Sample Controlled Thermogravimetry (SCTG)
-
B-TA1077 - Evaluation of Thermal Decomposition Behavior of Limestone - Quantitative Analysis of Decarbonation by TG-DSC
推荐产品
未找到心仪产品?立即体验“产品搜索器”