True submicron CT scanner with contrast-enhancing X-ray anode

    3D X-ray microscope

    Rigaku nano3DX is a true submicron resolution CT (computed tomography) scanner. The parallel beam geometry combined with an ultrabright 1200 W rotating anode X-ray source enhances the contrast of soft materials, which are normally difficult to image using high-energy X-ray sources. The X-ray anode can be selected from Cr (5.4 keV), Cu (8 keV), or Mo (17 keV) for low-energy and pseudo-monochromatic radiation to maximize the contrast for the given sample material and size. With the highest magnification lens, the nano3DX can achieve 325 nm voxel resolution and true submicron (700 nm) spatial resolution.

    nano3DX Overview

    How do I achieve high resolution?

    Rigaku nano3DX uses parallel beam geometry. This geometry uses an optical lens to magnify the sample image. It does not use the X-ray beam divergence and eliminates blurring caused by the X-ray focus size and drift. With the 20X magnification lens, you can achieve 325 nm voxel resolution and true submicron (700 nm) spatial resolution.

    At this resolution, you can see individual carbon fibers (~7.5 um), the intricate structures of seeds, small insects, etc.


    parallel beam geometry


    How do I change X-ray anodes?

    Rigaku nano3DX is equipped with a dual-wavelength rotating anode X-ray generator, MicroMax-007 HF. The rotating X-ray anode is made of Cu, providing Cu characteristic radiation of 8 keV. Another anode material, Cr 5.4 keV, Mo 17 keV, or W for Bremsstrahlung radiation, can be added to the Cu anode to provide the second radiation. You can switch between two radiations with a simple click on the instrument control software.

    You can image an even 5% density difference in organic materials by using optimized radiation and differentiate amorphous and crystalline phases, high- and low-density polyethylene, etc.




    Do I need to prepare my sample in a special way?

    No, X-ray CT measurements require minimum to no sample preparation. As far as the sample size is close to the FOV (field of view), you can mount the sample on the sample stage with a small pin as is, and you are ready to run a CT scan.

    Because X-ray CT experiments are done in the air and do not require conductivity on the sample as is the case for SEM (scanning electron microscopy), organic samples such as plants can be measured without a drying or coating process.


    nano3DX sample mounting

    Compare all CT products.

    nano3DX Features

    325 nm voxel / 700 nm spatial resolution
    Parallel beam geometry for true submicron resolution
    Best X-ray energy for low-density materials
    Selectable pseudo-monochromatic X-ray radiations
    Shorter scan time
    Ultrabright 1200 W X-ray source and sCMOS to increase the X-ray count and detection efficiency

    nano3DX Videos

    nano3DX Specifications

    Voxel resolution 325 nm — 10 μm
    Field of view (FOV) 0.66 — 20 mm
    Field of view (FOV) 0.66 — 20 mmMaximum sample size 20 mm diameter x 40 mm height
    Speed (shortest scan time) 30 sec
    Geometry Parallel beam geometry
    X-ray source 1200 W rotating anode microsource
    X-ray energy Pseudo monochromatic sources: Cr (5.4 keV), Cu (8 keV), Mo (17 keV) |
    Traditional source: W operated at 60 kV
    Lenses 1.25X, 2.5X, 5X, 10X, 20X
    Detector High-resolution sCMOS
    Detector pixel size 6.5 microns
    Detector size 2048 x 2048 pixels
    Dimensions 1300 (W) x 1880 (H) x 655(D) mm (PC, chiller, vacuum pump not included)
    Weight Approx. 600 kg

    nano3DX Options

    The following accessories are available for this product:


    X-ray CT image visualization, processing, segmentation, and quantitative analysis software


    X-ray CT image visualization, image processing, quantitative and dimensional analyses software

    nano3DX Application Notes

    The following application notes are relevant to this product

    nano3DX Resources

    nano3DX Events

    Learn more about our products at these events

    There are no upcoming events

    Contact Us

    Whether you're interested in getting a quote, want a demo, need technical support, or simply have a question, we're here to help.