Environment and Pollution
Wastewater, soils and sediments to RoHS
For monitoring of contaminated sediments, soils, air and water and classification of materials for recycling, wavelength dispersive and energy dispersive X-ray fluorescence (WDXRF and EDXRF) are the non-destructive analytical techniques of choice to fulfill the requirements of US EPA requirements for heavy metal concentrations (RCRA metals) and the European Union (EC) environmental regulations of RoHS/WEEE. Rigaku solutions and services for your non-destructive testing are essential for your product “end-of-life" recovery and recycling strategy.
Learn how these techniques can be used in environmental analysis
Wavelength dispersive X-ray fluorescence spectrometry offers fast, consistent, and non-destructive elemental analysis across both inorganic and organic samples. Its broad applicability and measurement stability make WDXRF a dependable tool for composition monitoring, contamination assessment, and resource evaluation in environmental laboratories.
Energy dispersive X-ray fluorescence is often stipulated in environmental regulations and guidelines. Whether measuring toxic heavy metals in aerosols on air filters, monitoring industrial waste streams to sub-ppm levels, or testing soils, our cost-effective EDXRF solutions can help achieve quick results without complex setups or extensive sample preparation.
X-ray diffraction helps environmental laboratories, researchers, and remediation teams identify the crystalline phases present in soils, sediments, dusts, aerosols, industrial residues, ash, sludge, scale, corrosion products, and contaminated materials. While elemental analysis shows which elements are present, XRD shows which mineral or crystalline compounds contain those elements.
Application notes
Explore the example analyses to see which analytical technique is right for you.
-
XRD1014 - Ab-initio Crystal Structure Determination of a Cu-MOF Using Powder Diffraction Data Obtained from a Benchtop X-ray Diffractometer
-
WDXRF1109 - Automatic Quant Application Setup Applied to Calibrating Coal Fly Ash Fused Beads
-
WDXRF1102 - Standardless FP Analysis of Plant, Animal and Food Samples Applying Correction by Scattering Line
-
WDXRF1100 - Fused Bead Analysis for Wide Concentration Ranges of Various Oxide Materials using OXIDE-FB-PAK
-
WDXRF1092 - Fixed Angle Measurement using the Semi-Quantitative Analysis Function SQX of ZSX Guidance Software
-
WDXRF1090 - Semi-quantitative Analysis of Recycled Solid Fuel with Benchtop WDXRF Supermini200
-
WDXRF1089 - Analysis of Hazardous Heavy Elements in Soil and Sediment using ZSX Primus IV
-
WDXRF1086 - Boron and Fluorine Quantitative Analysis for Water Solution by Micro-droplet Method using Ultra Carry Filter Paper
-
WDXRF1085 - Trace Element Analysis for Water Solution by Micro-droplet Method using Ultra Carry Filter Paper
-
WDXRF1070 - Chlorine Analysis of Aluminosilicate for Fluid Catalytic Cracking Catalyst by WDXRF
-
WDXRF1060 - Elemental Determination of Whole Coal by the Pressed Powder Method
-
TA6015 - Thermal Decomposition of Asbestos Analyzed by Thermo Mass Photo
-
EDXRF3150 - NEX QC+ QuantEZ—Analysis of Black Mass for Lithium Battery Recycling
-
EDXRF3142 - NEX CG II - Analysis of Coal Fly Ash
-
EDXRF3137 - NEX CG II - Ultra Carry Detection Limits
-
EDXRF3133 - NEX CG II - Analysis of Air Filters - U.S. EPA Sensitivity
-
EDXRF3122 - NEX CG II - Ultra Carry Detection Limits
-
EDXRF3074 - NEX DE—Air Filter Detection Limits
-
EDXRF3064 - NEX CG II - Analysis of Air Filters - U.S. EPA Sensitivity
-
EDXRF3000 - NEX CG II - EPA Tier 3 Gasoline
-
EDXRF1984 - NEX QC+ QuantEZ—Cl, Pb and Metals in Refuse Derived Fuel
-
EDXRF1943 - NEX QC+ QuantEZ—Pt, Pd, Rh in Recycled Automotive Catalysts
-
EDXRF1915 - NEX DE—Nuclear Power Station Cooling Water Filters
-
EDXRF1844 - NEX DE VS—RoHS Metals-Pak Rapid Screening by XRF
-
EDXRF1807 - NEX DE VS—RoHS Lead-Free Solder-Pak Rapid Screening by XRF
-
EDXRF1803 - NEX DE VS—RoHS PE-Pak Rapid Screening by XRF
-
EDXRF1602 - NEX DE VS—RoHS PE by Empirical Method
-
EDXRF1549 - NEX DE—Analysis of Metals in Aerosols on Air Filters
-
EDXRF1507 - NEX QC+—Activated Carbon
-
EDXRF1420 - NEX QC+—Chlorine and Ash in Biomass
-
EDXRF1033 - Chlorine and RoHS Elements in Polyethylene
-
B-TA2047 - Evaluation of Biomass-Coal Co-Combustion by TG-FTIR
-
B-TA2039 - Evaluation of Biomass Plastics by TG-FTIR
-
B-TA1006 - Microplastics (MP) Characterization by TG-DSC
Recommended products
Not seeing what you are looking for? Try Product Finder.
Supermini200
Benchtop tube below sequential WDXRF spectrometer analyzes O through U in solids, liquids and powders
Learn moreNEX CG II Series
High-performance indirect excitation EDXRF for complex applications with trace elements and variable base matrices
Learn moreCQL Max-ID
Offers features and benefits that maximize chemical threat analysis in safety and security applications
Learn moreZSX Primus IV𝒾
High-power, tube-below, sequential WDXRF spectrometer with new ZSX Guidance expert system software
Learn more
Contact Us
Whether you're interested in getting a quote, want a demo, need technical support, or simply have a question, we're here to help.
Subscribe to the Bridge newsletter
Stay up to date with materials analysis news and upcoming conferences, webinars and podcasts, as well as learning new analytical techniques and applications.