TMA Cooling Unit
Different types of cooling units are available to meet your measurement purpose. Each cooling unit is easy to install and remove, so they can be readily exchanged according to your measurement needs.
TMA Cooling Unit Overview
| Cooling unit | Refrigerated cooling | LN2 auto-filling cooling |
 |
 |
|
|
Supports continuous heating/ cooling measurement without using liquid nitrogen. The optional Power ON/OFF unit provides zero waiting time before and after measurement. The refrigerant used is non-chlorofluorocarbon (non-CFC), exempt from fluorocarbon emission regulations, eliminating the need for cumbersome management and inspection. |
Liquid nitrogen is used as a cooling medium. The unit controls the supply of the low temperature nitrogen gas according to the temperature program. Suitable for continuous heating and cooling measurements over a wide temperature range. | |
| Measurement temperature range | -70℃ to 600℃ | -150℃ to 600℃ |
| Heating rate (Max) | 20℃/min. | 20℃/min. |
| External dimensions/ weight | W295×D500×H570 mm / 60 kg | (Controller) W150×D250×H270 mm /4 kg (Dewar) φ480×H940 mm / 25 kg |
| Power supply | Single phase 100 VAC, 50/60 Hz, 15 A 1 plug with grounding | Single phase 100 VAC, 50/60 Hz, 8 A 1 plug with grounding |
| Note | Can be connected to the Power ON/OFF unit | Dewar capacity: 30 L |
TMA Cooling Unit Features
Two types are available depending on the measurement purpose and temperature range.
Easy to attach and remove.
The electric cooling system uses a non‑fluorocarbon refrigerant, so no statutory inspection is required.
TMA Cooling Unit
Contact Us
Whether you're interested in getting a quote, want a demo, need technical support, or simply have a question, we're here to help.