Polymers and Plastics
Element and phase analysis, particle size and molecular structure
For all tasks in polymer research, development and production quality control, X-ray fluorescence (XRF) analysis can identify and quantify the concentrations of additives (pigments, fillers, flame retardants, stabilizers) such as antimony, barium, bromine, calcium, chromium (in accordance with RoHS/WEEE regulations), copper, phosphorus, titanium or zinc. In addition, many plastic polymers have some degree of order that can be identified and studied by X-ray diffraction (XRD) methods. The percent crystallinity—measured with XRD—can correlate to processing methods. The determination of unit cell type, lattice parameters, microstructure and crystallographic orientation through pole figures can be of importance. Periodic or crystalline structures on the nanoscale can be examined by small angle X-ray scattering (SAXS) and wide angle X-ray scattering (WAXS). Rigaku offers comprehensive Instruments and services for all methods.
Download the Polymer Application eBook
Application notes
Explore the example analyses to see which analytical technique is right for you.
-
XRT1539 - Co, Br, Mn in TPA and PTA
-
XCT2101 - Textile and Fiber Industry using the nano3DX
-
WDXRF1092 - Fixed Angle Measurement using the Semi-Quantitative Analysis Function SQX of ZSX Guidance Software
-
TA6022 - Thermal Decomposition and Combustion of Polyetheretherketone (PEEK)
-
TA6018 - Thermal Decomposition of Polyolefins
-
TA6016 - Thermal Decomposition of Polyvinyl Resins
-
TA6012 - Evaluation Amount of Water in Flour, Drug and Polymer
-
TA6011 - Determination of Compounding Ratio for Complex Material, Nylon
-
TA6008 - Characterizing the Thermal Degradation of Polymer
-
TA6007 - Rapid Discrimination of Thermal Decomposition Analysis for Nylons
-
TA6003 - Evolved Gas Analysis of PEFC
-
TA6002 - Evolved Gas Analysis for Volatile Organic Compounds
-
TA6001 - Characterizing Thermal Analysis for Polymer Product
-
TA5014 - Expansion of Powder Material, Polymethyl­methacrylate (PMMA)
-
TA5008 - Water Absorption and Dehydration of Organic Compound α-cyclodextrin
-
TA5007 - Thermal Desorption of Aromatic Compound in Metallic Complex
-
TA5005 - Fusion of Polyethylene
-
TA5004 - Thermal Decomposition of Polyester in Water-vapor Atmosphere
-
TA-Pyrolisis - Characterization of Pyrolysis of Polymers by TG-MS
-
RACCT9033 - Water Flosser Tip Stress Simulation using X-ray CT Scan
-
RACCT9032 - Plastic Parts Quality Control and Reverse Engineering by X-ray CT
-
RACCT9031 - Plastic Locking Parts Dimensional Comparison by X-ray CT
-
RACCT9029 - Golf Ball Layer Thickness Analysis by X-ray CT
-
RACCT9028 - Bottlecap Air Gap Analysis by X-ray CT
-
RACCT9025 - 3D Printed Plastic Dimensional Analysis by X-ray CT
-
EDXRF3197 - NEX QC+ QuantEZ - Additives in Polymers
-
EDXRF1853 - Analysis of Fiberglass
-
EDXRF1846 - NEX DE—Analysis of Carbon Black
-
EDXRF1559 - NEX QC+—Low Silicone Coating on Plastic
-
EDXRF1033 - Chlorine and RoHS Elements in Polyethylene
-
EDXRF1023 - Analysis of PVC Resins
-
B-XRI1024 - Fiber orientation analysis of short fibers in GFRPs by micro X-ray CT
-
B-XRI1016 - Observation and Analysis of Laminated Films by Micro X-ray CT
-
B-XRI1004 - Visualization and Size Analysis of Foreign Matter in CFRP using a High-resolution 3D X-ray Microscope
-
B-XRD2032 - Observation of Orientation State of Polypropylene Film Products by 2D-GIWAXS Measurement
-
B-XRD1169 - Temperature-dependent Analysis of Polymer Crystallization Behavior Using High-speed Time-resolved Measurement
-
B-XRD1162 - In-situ Evaluation of Orientation in Polymer Films at Different Draw Ratios by Wide Angle X-ray Scattering
-
B-XRD1119 - Quantitative Characterization of Polymer film by Orientation Function
-
B-XRD1063 - Measurement of a Film Sample
-
B-TA2042 - Thermal Stability of Polyethylene Glycol Studied by TG-MS
-
B-TA2039 - Evaluation of Biomass Plastics by TG-FTIR
-
B-TA2032 - Qualitative Analysis of Biopolymer in Humidity Atmosphere by HUM-STA-MS
-
B-TA2028 - Thermal Decomposition of Nitrile Gloves by Sample Observation STA-MS
-
B-TA2027 - Evolved Gas Analysis of Polyacetal
-
B-TA1093 - DSC Evaluation of the Effect of Outdoor Exposure on the Glass Transition Temperature of Natural Rubber
-
B-TA1092 - Effect of Curing Time on Epoxy Adhesive Bond Strength Evaluated by TMA
-
B-TA1088 - Expansion and Shrinkage of Fibers under Load Variation; Effect of Degradation
-
B-TA1087 - Expansion and Shrinkage of Fibers Induced by Humidity Changes
-
B-TA1085 - Analysis of Amorphous PMMA -Sample Observation STA, ChromTA (Chromatic Thermal Analysis)
-
B-TA1082 - Analysis of amorphous PET -Sample Observation STA, ChromTA (Chromatic Thermal Analysis)
-
B-TA1081 - TG‑DTA Evaluation of Epoxy Resin Using Sample Observation Function
-
B-TA1074 - Load-dependent expansion and shrinkage of fibers
-
B-TA1073 - Combustion Behavior of Fibers: Natural and Synthetic Fibers
-
B-TA1072 - Moisture Absorption of Fibers: Mass Changes Induced by Humidity Variations
-
B-TA1070 - Thermal History Of Electrical Wire Insulating Sheath Polymer
-
B-TA1068 - TMA Measurement of Heat-Shrink Tubing
-
B-TA1055 - Change in the glass transition temperature due to the degradation of fluoroelastomer
-
B-TA1054 - Expansion and Shrinkage of Polyimide Films Due to Changes in Humidity
-
B-TA1053 - Expansion of Polymer Films : Differences Due to Humidity
-
B-TA1051 - Degradation of Fluoroelastomers Deformation Induced by Changes in Applied Load
-
B-TA1049 - Changes in thermal expansion ratio caused by the degradation of fluoroelastomer
-
B-TA1048 - Crystallization of LLDPE
-
B-TA1047 - Curing of Epoxy Adhesives by DSC
-
B-TA1046 - DSC measurement for crystallinity of HDPE
-
B-TA1039 - Measurement of glass transition of PMMA by dynamic DSC
-
B-TA1030 - Thermal Decomposition of Starch-based Filler by Sample Observation STA
-
B-TA1028 - Thermal Behavior of Biodegradable Plastic Straw by STA
-
B-TA1026 - Thermal Analysis of PCB by TMA
-
B-TA1024 - Evaluation of O-ring by Low-temperature TMA
-
B-TA1015 - Oxidative Decomposition of HDPE
-
B-TA1012 - Measurement of Different Yarn Materials by STA
-
B-TA1006 - Microplastics (MP) Characterization by TG-DSC
-
B-TA1004 - Softening of Coating Material by TMA
Recommended products
Not seeing what you are looking for? Try Product Finder.
SmartLab
Advanced, state-of-the-art, high-resolution XRD system powered by Guidance expert system software
Learn moreDicifferX WAXS Edition
Wide-angle X-ray Scattering (WAXS) system revealing the structures of polymer materials
Learn moreNEX CG II Series
High-performance indirect excitation EDXRF for complex applications with trace elements and variable base matrices
Learn more
Subscribe to a Rigaku Newsletter
Stay up to date with the latest Rigaku news!
Contact Us
Whether you're interested in getting a quote, want a demo, need technical support, or simply have a question, we're here to help.