- Available with the XtaLAB Synergy range of diffractometers
- Direct, digital X-ray photon counting
- No phosphor blooming, no afterglow
- Single pixel point spread function with top-hat profile
- 100 μm x 100 μm pixel size
- Active area 77.5 mm x 80.3 mm
- No dark noise, no readout noise
- Frame rate of 100 Hz
- Electronically gateable
- Radiation tolerant design
Hybrid Photon Counting X-ray Detector
Large area Hybrid Photon Counting detector for single crystal X-ray diffraction
Rigaku Oxford Diffraction now offers the HyPix-6000HE Hybrid Photon Counting (HPC) detector. Like all HPCs, the HyPix-6000HE offers direct X-ray photon counting for every photon, single pixel top-hat point spread function with no readout noise and no dark noise. The 100 micron pixel size allows better resolution of reflections for long unit cells as well as improving reflection profile analysis. The HyPix-6000HE has a high frame rate of 100 Hz, as well as a Zero Dead Time mode providing the ultimate in error-free shutterless data collection.
The advantage of direct detection found in the Hypix-6000HE is that no phosphor is required and the size of the pixel determines the point spread function rather than the blooming that occurs on detectors with a phosphor. This means that reflections are sharper and more easily resolved. Profile analysis will not require incorporating additional pixels to compensate for phosphor blooming leading to less experimental noise, such as air scatter, being incorporated into a reflection. As opposed to monolithic detectors, such as CMOS-based CPADs, a hybrid detector separates the detection area from the read-out electronics. This means that the full area of a pixel is sensitive to incoming X-ray photons, with the charge being transmitted through an indium bump bond to a secondary readout pixel. In APS-CMOS/CPAD detectors, each pixel contains in-pixel readout electronics that come at the expense of light sensitive area. Monolithic detectors used in crystallography often have a 30% dead area or detection-gap per pixel that occurs through the whole detector.
The HyPix-6000HE is the perfect detector for measuring diffraction from small and poorly diffracting samples due to the extremely low noise characteristics: you can count as long as you need to without the dark current or noise build up seen in other detectors. When your crystals diffract well, the high frame rate and Zero Dead Time mode mean that you can collect data extremely fast and accurately in a shutterless mode.
The HyPix-6000HE is air-cooled for convenience. Unlike an integrating detectors, there is no dark current build up from thermal electrons so high temperature stability is not needed. Lower efficiency and less stable air cooling is therefore not detrimental to data quality measured with HPC detectors.
|Single crystal X-ray diffraction
|Fast, sensitive digital X-ray photon counting detector
|Hybrid Photon Counting (HPC) X-ray detector
|Air cooled HPC detector
|External PC, MS Windows® OS, CrysAlisPro Software
|137 (W) x 143 (H) x 216 (D) (mm)
|3.8 kg (core unit)
|1Ø, 100-240 V, 15 A