理學推薦以下產品
未找到心儀產品?立即體驗“產品檢索器”
XTRAIA MF-3400
Multi-functional XRR / XRD / XRF metrology system for thin-film analysis and process control for patterned wafer up to 300 mm.
了解更多XTRAIA MF-2000
整合XRR、EDXRF和XRD的計量工具:EDXRF用於測量薄膜成分與厚度;XRR用於測量薄膜厚度、密度與粗糙度;適用於最大200毫米晶圓的圖案化與非圖案化薄膜
了解更多Rigaku Automation Interface
Open Python orchestration interface for seamless integration and safe testing
了解更多應用說明
以下是與該技術相關的應用說明
-
XRT1539 - Co, Br, Mn in TPA and PTA
-
XRT1337 - Cu Wood Treatment
-
XRT1336 - Gold Processing
-
XRT1306 - Chemical Bath for Copper Foil Surface Treatment
-
XRF1131 - Standardless FP Analysis of Lithium-ion Battery Cathode Material LiFePO₄ by ZSX Primus IV
-
WDXRF1126 - Accurate Quantitative Analysis of Ferrosilicon by the Fusion Method using ZSX Primus III NEXT
-
WDXRF1124 - Quantitative Analysis of Blast Furnace Slag by Fusion Method on the ZSX Primus III NEXT
-
WDXRF1123 - Quantitative Analysis of Stainless Steel using the ZSX Primus III NEXT
-
WDXRF1122 - Silicate Rock Analysis by Fusion Bead Method on ZSX Primus III NEXT
-
WDXRF1121 - Quantitative Analysis of Cast Iron using ZSX Primus III NEXT
-
WDXRF1120 - Quantitative Analysis of Low Alloy Steel using the ZSX Primus III NEXT
-
WDXRF1119 - Cement Raw Meal Analysis by Pressed Powder Method on the ZSX Primus III NEXT
-
WDXRF1118 - Quality and Process Control Analysis of Natural and Processed Iron Ores by the Pressed Powder Method
-
WDXRF1117 - Lead Analysis in Gasoline — ASTM D5059-21 — using WDXRF ZSX Primus IV𝒾
-
WDXRF1116 - Lead Analysis in Gasoline — ASTM D5059-21 — using Benchtop WDXRF Supermini200
-
WDXRF1115 - Cement Analysis by the Fusion Method on Benchtop WDXRF Supermini200 According to ASTM C114-18
-
WDXRF1114 - Cement Analysis by the Pressed Powder Method on Benchtop WDXRF Supermini200 According to ASTM C114-18
-
WDXRF1113 - Cement Analysis by the Pressed Powder Method on the ZSX Primus III+ According to ASTM C114-18
-
WDXRF1111 - FeO Analysis in Iron Ore Sinters Using the XRD Channel on multi-channel XRF Spectrometer Simultix 15
-
WDXRF1110 - Cement Analysis by the Fusion Method According to ASTM C114-18
-
WDXRF1109 - Automatic Quant Application Setup Applied to Calibrating Coal Fly Ash Fused Beads
-
WDXRF1108 - Sulfur Analysis in Crude Oil and High-sulfur Fuels by WDXRF according to ASTM D2622-16
-
WDXRF1107 - Analysis of Low-concentration Sulfur in Petroleum-based Fuels by WDXRF According to ASTM D2622-16
-
WDXRF1106 - Sulfur Analysis in Petroleum Products by WDXRF according to ASTM D2622-16
-
WDXRF1105 - Lubricating Oil Analysis by WDXRF According to ASTM D6443-14
-
WDXRF1104 - Analysis of S, Fe, Ni and V in Residual Oil According to IP610/13
-
WDXRF1102 - Standardless FP Analysis of Plant, Animal and Food Samples Applying Correction by Scattering Line
-
WDXRF1101 - Fused Bead Analysis for Refractories using Application Package Refractory Series
-
WDXRF1100 - Fused Bead Analysis for Wide Concentration Ranges of Various Oxide Materials using OXIDE-FB-PAK
-
WDXRF1099 - Trace Element Analysis in Geological Samples by the Pressed Powder Method, using GEO-TRACE-PAK
-
WDXRF1098 - Fe, Ni and Co Alloy Analysis by the Fundamental Parameter Method using the Simultix 15
-
WDXRF1096 - Fe, Ni and Co Based Alloy Analysis by Fundamental Parameter Method using ZSX Primus III+
-
WDXRF1095 - Multiple Element Determination of Nickel Sulfide Ores by the Pressed Powder Method on Simultix 15
-
WDXRF1094 - Quality and Process Control of Natural and Processed Iron Ores by the Pressed Powder Method on Simultix 15
-
WDXRF1092 - Fixed Angle Measurement using the Semi-Quantitative Analysis Function SQX of ZSX Guidance Software
-
WDXRF1091 - Beryllium Analysis in Beryllium Copper Alloy using ZSX Primus IV with RX85
-
WDXRF1090 - Semi-quantitative Analysis of Recycled Solid Fuel with Benchtop WDXRF Supermini200
-
WDXRF1089 - Analysis of Hazardous Heavy Elements in Soil and Sediment using ZSX Primus IV
-
WDXRF1088 - Boron Analysis in Glass Powder
-
WDXRF1086 - Boron and Fluorine Quantitative Analysis for Water Solution by Micro-droplet Method using Ultra Carry Filter Paper
-
WDXRF1085 - Trace Element Analysis for Water Solution by Micro-droplet Method using Ultra Carry Filter Paper
-
WDXRF1084 - Mapping and Small Spot Analysis with a General-Purpose XRF Spectrometer
-
WDXRF1083 - Analysis of Ultralow Sulfur in Automotive Fuels According to ASTM D2622-16 by Micro-Z ULS
-
WDXRF1082 - Sulfur Analysis in Crude Oil and high-sulfur Fuels by Benchtop WDXRF according to ASTM D2622-16
-
WDXRF1081 - Analysis of Low-concentration Sulfur in Petroleum-based Fuels by Benchtop WDXRF according to ASTM D2622-16
-
WDXRF1080 - Sulfur Analysis in Petroleum Products by Benchtop WDXRF According to ASTM D2622-16
-
WDXRF1079 - Lubricating Oil Analysis by Benchtop WDXRF according to ASTM D6443-14
-
WDXRF1077 - Sulfur Analysis in Crude Oil and High-sulfur Fuels by WDXRF according to ASTM D2622-16
-
WDXRF1076 - Analysis of Low-concentration Sulfur in Petroleum-based Fuels per ASTM D2622-16
-
WDXRF1071 - Semi-quantitative FP Analysis of Geological Samples
-
WDXRF1070 - Chlorine Analysis of Aluminosilicate for Fluid Catalytic Cracking Catalyst by WDXRF
-
WDXRF1068 - Silicate Rock Analysis by Fusion Method
-
WDXRF1067 - Fast and Accurate Determination of the Composition of Natural and Processed Iron Ores by the Fusion Method on Simultix 15
-
WDXRF1066 - Determination of Chemical Composition of Nickel Laterite Ore by Fusion Method
-
WDXRF1063 - Thickness/composition of ITO Thin Film by FP Method
-
WDXRF1062 - Quantitative Analysis of Soda-lime Glass
-
WDXRF1061 - Polymetallic Sulfide Ore Analysis with Supermini200
-
WDXRF1060 - Elemental Determination of Whole Coal by the Pressed Powder Method
-
WDXRF1059 - Semi-quantitative Analysis of Glass Raw Materials
-
WDXRF1058 - Quantitative Analysis of Dolomite and Limestone by Pressed powder Method with Supermini200
-
WDXRF1055 - Quantitative Analysis of Aluminum Alloy on Supermini200
-
WDXRF1054 - Analysis of S, Fe, Ni and V in Residual Oil According to IP610/13
-
WDXRF1052 - Accurate Determination for Elements in Laterite Ores by Pressed Powder Method
-
WDXRF1048 - Fused Bead Analysis for Wide Concentration Ranges of Various Oxide Materials on Benchtop WDXRF
-
WDXRF1047 - Highly Accurate Determination of Total Iron in Natural and Processed Iron Ores using Pressed Powder Method
-
WDXRF1042 - Quantitative Analysis of Low Alloy Steel using the Supermini200
-
WDXRF1041 - Copper Concentrate by Pressed Powder Method
-
WDXRF1040 - Cement Raw Meal by the Pressed Powder Method
-
WDXRF1036 - Semiquant Analysis by the SQX Scatter FP Method
-
WDXRF1027 - Cu Concentrate with Advanced Correction for Fused Beads
-
WDXRF1026 - Accurate Quantitative Analysis of Ferrosilicon by the Fusion Method
-
WDXRF1025 - Quantitative Analysis of Blast Furnace Slag by the Pressed Powder Method
-
WDXRF1024 - Quantitative Analysis of Blast Furnace Slag by Fusion Method
-
WDXRF1023 - Pt, Rh and Pd Analysis of Used Automobile Catalyst by WDXRF
-
WDXRF1021 - Quantitative Analysis of Stainless Steel
-
WDXRF1019 - Silicate Rock Analysis by Fusion Method
-
WDXRF1017 - Quantitative Analysis of Cast Iron
-
WDXRF1009 - Quantitative Analysis of Low Alloy Steel
-
WDXRF1005 - Cement by Pressed Powder Method ASTM C114-11
-
WDXRF1002 - Analysis of Iron Ores by Oressed Powder Method
-
RSMD010 - Metrology for Substrate Back Side Contamination
-
RSMD005 - Surface Contamination of SiC, GaN Power Device Wafers
-
RSMD003 - WDXRF Composition Mapping of a PZT Sputtering Target
-
RSMD002 - Thickness Characterization of a Power Device Backside Electrode
-
RSMD001 - Evaluation Of Wet Cleans In SiC Power MOSFET Fabrication By TXRF
-
EDXRF3279 - NEX QC II - Sulfur in Oil by ASTM D4294
-
EDXRF3272 - NEX QC II+ - Analysis of Lube Oils by ASTM D7751
-
EDXRF3269 - NEX QC II - Silicone Coat Weight on Paper and Plastic
-
EDXRF3268 - NEX QC II—CCA Wood Treatment
-
EDXRF3267 - NEX QC II—Copper in Wood Treatment
-
EDXRF3236 - NEX QC II+ - Metals in Crude and Residual Oil per ASTM D8252
-
EDXRF3226 - NEX CG II - Analysis of Nutrients in Silage
-
EDXRF3214 - NEX CG II - Elemental Analysis of Glass and Raw Materials
-
EDXRF3209 - NEX CG II - Analysis of Coal
-
EDXRF3186 - NEX DE - Nutrient Premixes for Milled Grain Enrichment
-
EDXRF3142 - NEX CG II - Analysis of Coal Fly Ash
-
EDXRF3137 - NEX CG II - Ultra Carry Detection Limits
-
EDXRF3134 - NEX CG II - Analysis of Rare Earth Elements in Clay
-
EDXRF3133 - NEX CG II - Analysis of Air Filters - U.S. EPA Sensitivity
-
EDXRF3122 - NEX CG II - Ultra Carry Detection Limits
-
EDXRF3074 - NEX DE—Air Filter Detection Limits
-
EDXRF3064 - NEX CG II - Analysis of Air Filters - U.S. EPA Sensitivity
-
EDXRF3051 - NEX CG II - Analysis of Cement and ASTM C114 Qualification
-
EDXRF3001 - NEX CG II - Pb in Gasoline by ASTM D5059 Methods C and A
-
EDXRF3000 - NEX CG II - EPA Tier 3 Gasoline
-
EDXRF2099 - Manganese in Gasoline by ASTM D5059 Method D
-
EDXRF2096 - Organic Chlorides in Crude by ASTM D4929 Procedure C
-
EDXRF2095 - Analysis of ULSD
-
EDXRF2039 - NEX QC+—Cl and S in Waste Oil and Used Oil
-
EDXRF2000 - NEX DE VS—Industrial Forensics
-
EDXRF1994 - Material Identification
-
EDXRF1990 - NEX QC—Plating Baths
-
EDXRF1984 - NEX QC+ QuantEZ—Cl, Pb and Metals in Refuse Derived Fuel
-
EDXRF1978 - NEX DE Series—Analysis of Alloy Powders for Metal 3D Printing
-
EDXRF1970 - Metals in Crude and Resid as per ASTM D8252
-
EDXRF1943 - NEX QC+ QuantEZ—Pt, Pd, Rh in Recycled Automotive Catalysts
-
EDXRF1933 - NEX DE Series—Catalysts Residue and Heavy Metal Screening in Pharma Formulation Process Chemistry
-
EDXRF1924 - NEX QC—Marine Fuel Analyzer
-
EDXRF1923 - NEX DE—Organic Chlorides in Crude by ASTM D4929 Procedure C
-
EDXRF1915 - NEX DE—Nuclear Power Station Cooling Water Filters
-
EDXRF1904 - NEX QC+—Chromium on HDG Steel
-
EDXRF1893 - NEX QC+—Analysis of Lead in Gasoline by ASTM D5059 Bi IS Method
-
EDXRF1884 - Alloy Powders for 3D Printing
-
EDXRF1877 - NEX QC+—TiO₂ and ZnO in Lotions
-
EDXRF1858 - NEX QC+ QuantEZ—P₂O₅ and K₂O in Fertilizers
-
EDXRF1856 - NEX DE—Additive Elements in Lubricating Oils ASTM D7751
-
EDXRF1853 - Analysis of Fiberglass
-
EDXRF1846 - NEX DE—Analysis of Carbon Black
-
EDXRF1844 - NEX DE VS—RoHS Metals-Pak Rapid Screening by XRF
-
EDXRF1834 - NEX QC+—Titanium on Steel
-
EDXRF1812 - NEX QC+—Phosphorus on Steel
-
EDXRF1807 - NEX DE VS—RoHS Lead-Free Solder-Pak Rapid Screening by XRF
-
EDXRF1803 - NEX DE VS—RoHS PE-Pak Rapid Screening by XRF
-
EDXRF1769 - NEX QC+ QuantEZ—Mud Logging
-
EDXRF1760 - NEX QC+—Manganese in Gasoline
-
EDXRF1759 - NEX QC—Manganese in Gasoline
-
EDXRF1748 - NEX DE—Finished Portland Cement
-
EDXRF1720 - NEX DE VS—Electroless Nickel Plating
-
EDXRF1693 - NEX DE Series—Ni:Fe Metallurgy
-
EDXRF1658 - NEX DE—Analysis of ULSD
-
EDXRF1654 - NEX QC+ QuantEZ—Academia and Teaching
-
EDXRF1631 - NEX QC+—Zirconium on Aluminum
-
EDXRF1630 - NEX QC—Zirconium on Aluminum
-
EDXRF1626 - NEX QC+—Dolomite
-
EDXRF1620 - NEX QC—Titanium on Aluminum
-
EDXRF1619 - NEX QC+—Titanium on Aluminum
-
EDXRF1614 - NEX QC+—High Calcium Limestone
-
EDXRF1605 - NEX QC—Chromium on Aluminum
-
EDXRF1602 - NEX DE VS—RoHS PE by Empirical Method
-
EDXRF1595 - NEX QC+ QuantEZ—Metals & Alloys
-
EDXRF1592 - NEX QC+—Complex Lube Oils
-
EDXRF1587 - NEX QC+—MgO & P₂O₅ in Phosphate Rock
-
EDXRF1576 - NEX DE—Gold Recovery
-
EDXRF1575 - NEX DE—Analysis of Silver and Copper in Ore
-
EDXRF1559 - NEX QC+—Low Silicone Coating on Plastic
-
EDXRF1552 - NEX QC+—Nutrients in Grass Silage
-
EDXRF1550 - NEX DE VS—Lead-free Solder
-
EDXRF1549 - NEX DE—Analysis of Metals in Aerosols on Air Filters
-
EDXRF1537 - NEX DE—Gold Processing
-
EDXRF1527 - NEX QC+—Phosphorus in Coal
-
EDXRF1521 - NEX DE—Analysis of S, Ca, V, Fe, Ni in Crude Oil
-
EDXRF1507 - NEX QC+—Activated Carbon
-
EDXRF1495 - Analysis of Lead (Pb) / Zinc (Zn) Ore
-
EDXRF1491 - NEX QC+—Iron in Milk Powder
-
EDXRF1480 - NEX QC+—Analysis of Iron Concentrates
-
EDXRF1457 - NEX QC—Copper in Ore
-
EDXRF1442 - NEX QC+—Analysis of Lead in Gasoline
-
EDXRF1438 - NEX QC—Analysis of Lead in Gasoline
-
EDXRF1425 - NEX QC—Analysis of Iron in Straw
-
EDXRF1422 - NEX QC+—Silicone Coating on Paper and Plastic
-
EDXRF1420 - NEX QC+—Chlorine and Ash in Biomass
-
EDXRF1419 - NEX QC+—Sulfur, Chlorine, and Ash in Coal
-
EDXRF1385 - Agricultural Soils and Plant Materials
-
EDXRF1378 - NEX QC - Predicting % Ash Content in Coal
-
EDXRF1366 - NEX QC+—Analysis of Metals in Nickel Ore
-
EDXRF1352 - NEX QC+—Analysis of Clay
-
EDXRF1343 - NEX QC+—Electric Arc Furnace Slag
-
EDXRF1331 - NEX QC+—Sulfur and Chlorine in Crude
-
EDXRF1323 - NEX QC+—Analysis of S, V, Ni in Crude Oil
-
EDXRF1312 - NEX QC+—Analysis of Lube Oils
-
EDXRF1299 - NEX QC+—Gold Processing
-
EDXRF1286 - NEX QC - Iron in Ore
-
EDXRF1273 - NEX QC+—Major Oxides in Finished Cement
-
EDXRF1272 - NEX QC+—Analysis of ULSD and Gasoline
-
EDXRF1255 - NEX QC—Sulfur in Gypsum
-
EDXRF1250 - NEX QC—Chlorine and Sulfur in Cement
-
EDXRF1249 - NEX QC—Analysis of Lube Oils per ASTM D6481
-
EDXRF1248 - NEX QC—IPBC Wood Treatment
-
EDXRF1241 - Analysis of Gemstones
-
EDXRF1231 - NEX QC—Sulfur in Coal
-
EDXRF1230 - NEX QC—Sulfur in Bunker Fuel
-
EDXRF1225 - NEX QC—ACZA Wood Treatment
-
EDXRF1203 - NEX QC—Penta Wood Treatment
-
EDXRF1187 - NEX QC—Ti & Fe in Kaolin Clay
-
EDXRF1177 - NEX QC—Iron Oxide in Silica Sand
-
EDXRF1175 - NEX QC—CCA Wood Treatment
-
EDXRF1149 - NEX QC—Sulfur in Crude
-
EDXRF1141 - NEX QC—CuO Wood Treatment
-
EDXRF1140 - NEX QC—Silicone Coating on Paper and Plastic
-
EDXRF1135 - NEX QC—Analysis of Sulfur in Diesel Fuel per ASTM D4294
-
EDXRF1108 - Analysis of Limestone
-
EDXRF1061 - Analysis of Heavy Metals in Aerosols on Air Filters
-
EDXRF1054 - SiO₂, AlSi, Ti, TiN, Pt, AlCu, and BPSG on Silicon
-
EDXRF1033 - Chlorine and RoHS Elements in Polyethylene
-
EDXRF1023 - Analysis of PVC Resins
-
BATT0004 - Chemical Composition Analysis of NMC Cathode
-
BATT0001 - Battery Material Development